Measured Surface and Detail
A wall with niches, corners and reveals takes different work from an open floor of the same area. Small areas can still require several installation visits.
Microcement in Dubai
- Interiors Since 1996
- Surface Assessment First
- Colour & Texture Samples
- Itemised Installation Scope
Microcement floors, walls and bathrooms for Dubai homes and commercial interiors. Start with the existing surface, approve the colour and texture, and agree the preparation, coating system and handover conditions before installation.
Microcement Floors and Walls in Dubai
Microcement is a thin, hand-applied decorative coating that creates a continuous mineral finish on suitable floors, walls and formed surfaces. Halo plans the finish around the base beneath it: soundness, moisture, existing joints, floor levels and how the room will be used. It can cover stable existing tiles in suitable conditions, but it cannot correct a moving floor or replace the waterproofing design of a shower. The proposed system and site assessment determine suitability.
Discuss Your ProjectPreparation and Repairs
Tile removal, bonding repairs, moisture treatment, levelling and waterproofing can change the project total more than the chosen shade.
System and Protection
The proposed primer, reinforcement where specified, coating layers, sealer and intended use determine the material and application scope.
Access and Phasing
Occupied rooms, lift bookings, protection, restricted working hours and separate work phases affect labour and programme.
Project Photos
Microcement Business Bay - Sculpted Microcement Reception Desk – Samer D.
Microcement Business Bay - Seamless Floor Through an Office Breakout Lounge – Samer D.
Microcement Business Bay - Grey Office Floor Under Open Desk Banks – Samer D.
23 more projects
A Microcement Project in Focus
The scope behind a documented Halo interior.
Documented Halo apartment project
A Sculpted Microcement Vanity at Jumeirah Living WTC
This documented apartment bathroom combines a formed microcement double vanity with metallic basins, bespoke mirrors and layered lighting. The vanity shows how a continuous finish can follow rounded geometry and integrate with the rest of a bathroom renovation.
- Custom formed double vanity with a continuous microcement finish.
- Coordination with vessel basins, taps and bespoke mirrors.
- Decorative finishes, lighting and associated bathroom services.
- Warm off-white microcement
- Metallic basins
- Bespoke mirrors
- Location
- Jumeirah Living WTC
- Property
- Apartment
- Focus
- Vanity & bathroom
Our Trusted Partners
Our clients include Property Owners, Interior Designers, Consultants and Contractors
Microcement Applications in Dubai
Choose the surface and the level of use first. A bedroom floor, shower wall and kitchen worktop need different preparation and protection even when they share the same colour.
Microcement Flooring
Continuous finishes for living rooms, bedrooms, reception areas and selected commercial interiors. We review substrate stability, thresholds, skirting and the expected foot traffic before agreeing the build-up.
- Floor levels and door clearances checked
- Sealer and cleaning regime matched to use
Microcement Walls
Feature walls and full-room finishes with hand-trowelled variation. Corners, socket edges, lighting and transitions to joinery are detailed so the sample translates into a finished room.
- Physical colour and texture approval
- Returns, reveals and junctions included in measurements
Microcement Bathrooms and Showers
Bathrooms need a compatible wet-area specification, with waterproofing, falls, drain connections and penetrations resolved before the decorative finish. The coating alone is not a universal waterproofing solution.
- Waterproofing responsibility defined
- Wet-use release and slip requirements confirmed
Kitchen Surfaces and Formed Vanities
A coating can wrap shaped vanities, splashbacks and selected work surfaces when the substrate and product system allow it. Heat, oils, standing water and cleaning products must be considered when choosing a kitchen finish.
- Edges, cut-outs and support assessed
- Heat and stain-care limitations explained
Commercial Microcement Finishes
For cafés, salons, showrooms and offices, the specification follows cleaning frequency, chair castors, footfall and access. Reception desks and display surfaces can also be reviewed as formed applications. Equipment zones and heavy-impact uses may need a different finish or protective treatment.
- Trading and access windows planned
- Furniture and equipment protection considered
Colours, Textures and Samples
See the proposed tone and texture on a physical sample before committing to the whole area. Hand application creates natural variation; lighting, sealer sheen and the scale of the finished surface affect its appearance.
- Sample records colour, texture and sheen
- Mock-up requirements agreed for larger areas
Is Microcement Right for Your Surface?
The best finish starts with a suitable base. These checks also make two microcement quotations easier to compare.
Can it go over existing tiles?
Sometimes. Tiles must be securely bonded, clean and suitable for the proposed system. Hollow tiles, active cracks and unstable grout joints need attention before an overlay is considered.
What to confirm
Agree tile checks, preparation, joint treatment and the final floor level.
Microcement or polished concrete?
Microcement is a thin decorative coating. Polished concrete is a different floor construction and finishing process. Similar-looking photographs do not mean the two have the same thickness, installation or structural requirements.
What to confirm
Ask for the actual product system and complete build-up, not just a colour name.
A seamless look with movement considered
The finish can reduce visible grout lines, but the substrate still moves. Existing movement joints and transitions need a system-specific detail; covering them indiscriminately increases the risk of cracking.
What to confirm
Record which joints remain and how changes of substrate are treated.
Bathroom or outdoor use?
Not every microcement product is suitable for showers, exterior exposure or standing water. Surface texture, sealing and the complete waterproofing detail must suit the actual location.
What to confirm
Confirm written manufacturer suitability for the intended exposure.
From Your Brief to Handover
Share the Surfaces
Send room photos, approximate floor and wall areas, your Dubai location and the desired finish.
Assess the Base
Review bonding, cracks, moisture, levels, joints and wet-area interfaces at the site.
Approve the Sample
Agree a physical colour, texture and sheen sample together with the specified coating system.
Prepare and Detail
Protect adjacent finishes and complete the agreed repairs, levelling, priming and joint details.
Apply and Seal
Apply the specified layers with the required drying intervals, then the compatible protective finish.
Inspect and Release
Check the finish and provide the permitted-use dates, care instructions and agreed aftercare terms.
Microcement Cost in Dubai: What Sets the Quote?
A microcement price per m² is useful only when it describes the same scope. Measure floors, walls, returns and formed details separately. Halo confirms pricing after reviewing the area, substrate and finish specification; there is no single rate that fits every bathroom or floor.
Define the Installation Scope
- Measured surfaces and approved finish sample
- Named coating system, preparation and joint details
- Specified layers, sealing and adjacent-surface protection
- Inspection, use restrictions and care instructions
Confirm Separate Costs and Terms
- Major substrate repair, demolition or moisture remediation
- New waterproofing, drain changes and sanitaryware removal
- Building fees, deposits, restricted access and phased visits
- VAT, warranty coverage and future resealing: confirm in the proposal
When Can You Use the Room Again?
The programme includes preparation, any waterproofing work, application, drying between layers, sealing and the release period before furniture, washing or shower use. Dry-to-touch is not the same as ready for full use. Halo confirms these milestones for the specified product and site conditions rather than promising a universal installation duration.
Installation Quality and Aftercare
Agree what gets checked during installation and what you need to maintain after handover.
Protect the Sealer
Use the approved neutral cleaner and avoid abrasive pads or aggressive descalers unless the system supplier expressly permits them.
Prevent Local Damage
Use furniture protection, lift heavy items and protect equipment zones. A decorative coating is not immune to scratches, impacts or substrate movement.
Plan Maintenance
Ask when the surface should be inspected or resealed and how local repairs may differ in tone from the original hand-applied finish.
Plan Your Microcement Project in Dubai
Share your villa community, apartment building or commercial premises. Halo reviews projects across Dubai, including Palm Jumeirah, Dubai Hills Estate, Arabian Ranches, Jumeirah, Dubai Marina, Downtown Dubai and Business Bay. Access, approvals and the installation method depend on the property and scope.
Property and Access
Confirm the exact building, permitted work hours, loading route, service-lift access and whether the property stays occupied.
Building Requirements
Identify applicable landlord or community permissions before work. Changes to a façade, building services or wet areas need a project-specific review.
One Coordinated Programme
Connect the specialist installation with the wider renovation, adjacent finishes and handover date. Agree any design, procurement or approval work in the proposal.
Choosing Rooms for Microcement Flooring
Assess room use and preparation before selecting a continuous finish.
Read MoreMicrocement Dubai Frequently Asked Questions
Practical answers before you select a specification or request a quotation.
Microcement flooring is a thin decorative coating applied in layers over a suitable base and protected with a compatible finish. It gives a continuous mineral appearance, while its performance depends on the substrate, product system, installation and care.
The cost depends on measured surfaces, base condition, repairs, wet-area work, finish, detail and access. Share photos and approximate areas for an initial review; the installation price should follow a defined specification and site assessment.
It may be possible over securely bonded, stable tiles after suitable preparation. Hollow tiles, active movement, moisture problems and floor-level conflicts must be resolved first. An overlay is confirmed after assessment rather than assumed from photographs.
Bathroom suitability depends on the complete specified wet-area system, including waterproofing, drains, penetrations and protective finish. Do not treat every decorative microcement coating as waterproof or suitable for showers and permanent immersion.
It can. Substrate movement, unsuitable preparation, impact and abrasive use can damage the finish. Correct detailing and care reduce risk, but a seamless appearance is not a guarantee against movement cracks or scratches.
Duration depends on area, preparation, product layers and drying conditions. The programme should state separate dates for light access, furniture placement, cleaning and wet use; these can be later than the final application day.
Yes. Agree a physical sample for the proposed colour, texture and sheen before application. Expect natural hand-applied variation, and view the sample in the lighting of the room where possible.
Halo can review occupied-property projects and agree protection, working areas, access and room downtime. Building rules, deliveries, dust-producing preparation and curing restrictions are confirmed before the programme is agreed.
Tell Us About Your Project
Share your Dubai location, current photos and requirements for microcement. Our team will review your brief on WhatsApp and arrange the appropriate next step.
01
Start With Your Existing Conditions
Photos and measurements help identify the next technical checks.
02
Agree the Specification
Confirm products, finish choices and installation responsibilities.
03
Review the Complete Scope
Discuss preparation, access, programme and handover together.
Request a Microcement Quote
Our Complete Range of Services
From concept to completion, we deliver every aspect of interior design, fitout, and property services under one roof.
Plan Your Microcement Installation
Send your Dubai location, current photos, measurements and preferred completion date. Halo will review the requirements and arrange the appropriate next step.